CERAMIC COATING
Ceramic Coatings are designed to increase gloss – ease of washing – make your vehicle remain cleaner longer – add hydrophobic properties and never wax again.

Ceramic Coating Buffalo, NY
XPEL’s Fusion Plus Ceramic Coating is a thin, hard coating specifically formulated for every surface on your vehicle. Fusion Plus leaves your vehicles paint with unrivaled gloss, superior hydrophobic protection, and improved defect resistance. Your vehicle will be protected from the elements, repel water, dirt & road grime, salt, resist stains & chemical etchings while have improved surface clarity and gloss. Experience your new vehicle, forever, with Fusion Plus ceramic coating.
AMAZING GLOSS & PROTECTION
The protective glass shield will keep the vehicle looking shiny and new. The coating is 100% Invisible.
ease of maintenance / never wax again
Not enough time in the day to wash/wax your car? Or, you simply don’t want to? Our ceramic coating makes cleaning your car a breeze. Oh, and you never have to wax again.
HYDROPHOBIC AND REPELS WATER
Chemical reaction that increases surface tension of clear coat. Its super hydrophobic effect makes any liquid bead up and rolls off the surface, encapsulating dirt and grime.
FUSION+ COMPLETE $1,599
PERFECT FOR SOMEONE WHO WANTS PROTECTION FOR ALL SURFACES
- FUSION+ PAINT & PPF
- FUSION+ GLASS
- FUSION+ PLASTIC & TRIM
- FUSION+ WHEEL
FUSION+ ESSENTIAL $999
PERFECT FOR SOMEONE WHO WANTS TO PROTECT THEIR PAINT OR PPF
- FUSION+ PAINT & PPF
FUSION+ INTERIOR+ $599
FUSION+ WHEEL FACES
$ 250
FUSION+ WHEELS OFF
$ 400
FUSION+ DOOR JAMBS
$ 100
FUSION+ ALL GLASS
$ 250
7-STEP PREPARATION
1) Hand Wash - 2) Mechanical Decontamination/ Clay Bar - 3) Chemical Decontamination - 4) Enhancement Polish - 5) Surface Prep/ IPA Wipe Down - 6) Apply Ceramic Coating - 7) Cure
CORRECTION
SELECT THE LEVEL OF PAINT CORRECTION THAT FITS YOUR NEEDS. 90% OF VEHICLES ONLY REQUIRE AN ENHANCEMENT POLISH (INCLUDED) BUT EXTRA POLISHING CAN BE ADDED, IF NEEDED.
CURE
TEDIOUS PANEL BY PANEL INSTALLATION WITH BUMPER TO BUMPER QUALITY CONTROL INSPECTION. CAR SPENDS FIRST 12 HOURS IN OUR TEMPERATURE/ HUMIDITY CONTROLLED FACILITY FOR OPTIMUM RESULTS.
OUR PROCESS
The Fusion Plus resin bonds with your factory clear coat. Once cured, the resin can only be removed through abrasion. We guarantee XPEL Fusion Plus’s protection qualities for 4 years however performance can continue well beyond this period.
Our ceramic coating is a very thin and flexible resin used by leading paint and panel shops and will not damage cured clear coats or void any automotive paint warranties. For repainted vehicles, XPEL Fusion Plus should not be applied for 30 days after repainting or for the duration your paint manufacturer specifies.
No, XPEL Fusion Plus is a very thin and flexible resin that bonds to the surface of your clear coat. It cannot crack or peel and the ceramic particles will not turn yellow.
Yes, XPEL Fusion Plus provides your vehicle with some additional scratch resistance by bonding with the paint on your vehicle and producing a thin, outer layer that is harder than your factory clear coat. Ceramic coatings are not scratch proof though and some factory clear coats are also softer than others. XPEL Fusion Plus will work to reduce light scratches over the life of the vehicle.
No. Once XPEL Fusion Plus is applied there is no need to wax your car. The Fusion Plus resin provides far more protection and hydrophobic properties than any wax can provide, and by waxing you may damage the coating’s hydrophobic effect over time. If you would like to top your Fusion Plus with additional products, we recommend using only XPEL Ceramic Boost and not to use carnauba based waxes or polishes.
Yes! Always dry your vehicle after washing and do not allow tap water to dry on the vehicle. Tap water contains minerals and if allowed to evaporate on the surface, the minerals left behind can be difficult to remove.
XPEL Fusion Plus will prevent water spots from penetrating into the lower paint layers and causing permanent damage, however in most cases it cannot prevent water spots from bonding on top of the surface. To avoid water spots, wash your vehicle regularly to remove road grime and always dry your vehicle.
No! Ceramic coatings do not prevent rock chips. If you are seeking a solution for stone chips please contact us regarding our XPEL Paint Protection Film services.
The standard process takes 1 day, or can take multiple days depending on the level of service you are requesting. This is due to our extensive preparation processes and care taken on the vehicles we work on to ensure the highest quality work is delivered.
Yes. XPEL Fusion Plus does require an annual wash/inspection to be performed within 30 days before or after the annual application date. The annual wash is to inspect the self-cleaning hydrophobic properties of the coating. If the vehicle has lost some of the hydrophobic properties, a rejuvenator will be applied to regain original performance / functionality.
No. XPEL Fusion Plus requires installation by a professional.